a-g.gif (12833 bytes)b-g.gif (11968 bytes)c-g.gif (7602 bytes)
2.jpg (3053 bytes)
3.jpg (3340 bytes)
3.jpg (3340 bytes)
5.jpg (3158 bytes)
6.jpg (2841 bytes)
7.jpg (3226 bytes)
8.jpg (3332 bytes)
9.jpg (3340 bytes)
10.jpg (3548 bytes)
11.jpg (3053 bytes)
12.jpg (3019 bytes)
13tst.jpg (1524 bytes)
13tst.jpg (1524 bytes)
13tst.jpg (3019 bytes)

WHAT IS STITCH & GLUE?

In conventional framed plywood construction, the side and bottom panels are glued and fastened to a longitudinal framing member (the "chine"), located at the seam where the side and bottom panels meet. In Stitch and Glue construction, the chine and the fasteners are replaced by a continuous bead or fillet of epoxy thickened with wood flour which is used to glue the panels together. The inside and outside seams are also reinforced with several layers of fiberglass tape. To hold the panels together during construction, small holes are drilled along the edges, and wire ties are inserted and twisted together ("stitched"). The wire ties are later removed or ground flush. Structural components such as bulkheads are attached to the hull in a similar manner.



© Clark Craft [clarkcraft.com]
16-99 Aqua Lane, Tonawanda, NY 14150
Tel: (716) 873-2640 Fax: (716) 873-2651