K TYPE POLYURETHANE

K Type Polyurethane is a premium marine one part enamel based on a unique specially formulated blend of polyurethane and chain stopped alkyd resins. It features excellent gloss retention, abrasion resistance, adhesion, durability and chemical resistance. For superior protection over Epoxy-Plus coatings or over a primed wood or fiberglass surface. It produces a very hard, gelcote like, tough film in 24 hours. So tough that it can be used on floors. Can be used below the waterline on trailered boats.

Easy to use as it combines a good long wet edge with quick thorough drying. Levels out exceptionally well without brush marks. Excellent light fastness, hiding power and long-term durability.

Available in the following colors: Gloss White, Platinum (light gray), Black, Bikini Blue (light/medium blue), Jade Green (dark green), and Bright Red.

Application: Brush, roller or spray.

Coverage: 100 sq. ft. per liter (33.8 ozs.)

EPI-PRIME EPOXY PRIMER

A true two-part epoxy product that provides a highly durable, uniform base which fairs rough surfaces, fills hairline crazing and porosity, covers superficial blemishes, and cures to a tough barrier coating. Apply directly to bare wood. Topcoat with K Type Polyurethane. For wood or fiberglass hulls.

Covers 100 sq. ft. per quart.

HIGH GLOSS VARNISH by Pettit

EASYPOXY HI-BUILD Varnish by Pettit is excellent over Epoxy-Plus and contains substantial amounts of ultraviolet light filter for maximum protection if a clear gloss natural wood finish is desired. Easy Poxy is a heavy body Hi-Build varnish that flows easily; coverage approximately 125 sq. ft. per quart. Recoat time 16 hours at 70 °. Sold in quarts only.

BARE WOOD - BRIGHTWORK

Sand with 200 grit paper. Wipe or vacuum clean to remove residue. Apply varnish as recommended.